For those of you who like to know all of the finer details, here they are.

	All of the decking sub-structure is pressure treated using Tanalith preservative this company is widely recognised as the world leader in timber protective treatment. The timber is graded as C16 for strength and suitable for in ground use.
	The method of construction is normally post & beam. 100 x 100mm posts are concreted in to the ground and then 100 x 50mm beams are bolted to the posts. The joists are then screwed to the beams @ 400mm centres, subject to deck design and finally the boards are screwed to the joists. Details may vary subject to design.
	All exposed timbers are smooth planed and safe to touch, making it ideal and safe for children and adults alike.
	Kingfisher offer smooth and grooved boards in hardwood and softwood to satisfy our clients requirements and both boards offer good anti slip properties providing they are kept clean.
	All metal work associated with the decking is either galvanised or stainless steel which ensures a long service life.
	The deck screws used are organically coated and salt spray tested to exceptionally high standards and will not rust or fail even in the most adverse weather conditions. Hardwood & Cedar boards are fixed using stainless steel screws.
	A heavy duty weed suppressant membrane is installed below the deck to prevent plant and weed growth.
	Any planning or local authority requirements are dealt with by Kingfisher so that you don’t have to.

Timber choices

	Scandinavian Pine
	A medium density softwood which is available in a smooth or grooved finish, quite a few knots per square metre, colour, turns a honey pine hue after a few weeks in the sun. NB please note to retain this colour the deck should be sealed with a silicone water repellent or decking oil. Dimensions 26 x144mm
	Southern Yellow Pine
	A medium to high density softwood primarily from North America, smooth finish only, very few knots per square metre, the colour is an even light golden brown with a beautiful grain pattern. See above for colour retention. Dimensions 25 x 140mm
	Western Red Cedar
	A low density softwood, again primarily sourced from North America, available in smooth finish only and in different grades from Architectural knotty to Cedar deck clear which is virtually knot free, colours range from mellow ambers through to sienna brown and reddish cinnamons. Dimensions 25 x 90mm & 25 x 140mm
	IPE Pronounced ee-pay
	A high-density hardwood from South America, also known as Ironwood because of its immense strength & density, three times stronger than Oak, varying shades from light to dark brown with a knot free appearance. Dimensions 21 x 145mm
	If left for a prolonged period of time, all timber will eventually turn a silvery grey, this can be avoided if required by periodically treating your deck with decking oil, silicone water repellent or a proprietary decking stain. This will not extend the life of your deck but will keep it looking in pristine condition.
	Subject to availability, we are able to fit any timber species our clients specify.

And finally if you require further technical information please contact us either by phone on 0800-915-97-97 or email to info@kingfisherdecking.co.uk